PURE separates external testing, internal documentation, model calculation and development status clearly.
Externally tested results with a defined test subject and documented conditions.
Traceable internal documentation, project documentation or documented technical source.
Calculated or modelled values with transparent assumptions and limits.
Development status, planned test path or technical hypothesis without a finished performance claim.
Externally tested specimen with a clear product-assignment boundary.
The tested specimen is THERM 4410. Formal mapping to the current PURE THERMO formulation must be documented before unrestricted product communication.
Documented measurements on sample plates at approximately 7–8 mm. The μ value is derived from sd and layer thickness and was not measured directly.
Documented measured value – original test basis / product assignment under review.Tested build-up: 5 mm itHeatProtect 4130 on 2.0 mm steel sheet · EN ISO 11925-2.
Maximum flame height 50–60 mm · 150 mm mark not reached · no afterflame · no ignition of the filter paper · no burning droplets/particles.
FIGRA 885 / 950 W/s · THR600s 8.13 / 9.70 MJ
No official overall SBI classification results from the indicative test. Results apply exclusively to the tested build-up.The hub prepares the key evidence areas for product and system assessment.
Source / test basis: Kiwa GmbH / MPA Berlin-Brandenburg · DIN EN 12664
λ = 0.0335 W/(m·K) under documented test conditions.
Limit: Test subject THERM 4410; formal assignment to the current Pure Thermo version is documented separately.View detailsSource / test basis: Documented measured value · original test basis under review
V = 25.6 g/(m²·d), sd = 0.76 m, V2 - medium at approx. 7-8 mm test layer.
Limit: Original test basis and product assignment under review. μ approx. 95-109 is derived, not directly measured.View detailsSource / test basis: Calculation model from layer thickness and λ
Interactive calculator for the calculated component U-value of the treated area.
Limit: Component U-value is not whole-building energy savings.View detailsSource / test basis: Internal development documentation
Temperature comparison as documented development and plausibility evidence.
Limit: Does not replace project-specific building-physics assessment.View detailsSource / test basis: External individual test / defined test build-up
Individual test applies only to the tested build-up.
Limit: Do not derive a general fire classification.View detailsSource / test basis: External individual test / defined test build-up
SBI results belong to the tested configuration.
Limit: Tested build-up only; no transfer to the combination.View detailsSource / test basis: Systemdefinition → EN ISO 11925-2 → EN 13823 / SBI → EN 13501-1
Combination route as development and validation path.
Limit: No combination class without complete system testing and classification.View detailsFor real components, the system context is decisive: substrate, moisture, layer build-up, finish and application limit.
